banner
Industrial Cluster
SCB10 Series Resin-Insulated Dry-Type Transformer for Energy Storage and Renewable Power Systems
SCB10 Series Resin-Insulated Dry-Type Transformer for Energy Storage and Renewable Power Systems
SCB10 Series Resin-Insulated Dry-Type Transformer for Energy Storage and Renewable Power Systems
SCB10 Series Resin-Insulated Dry-Type Transformer for Energy Storage and Renewable Power Systems
SCB10 Series Resin-Insulated Dry-Type Transformer for Energy Storage and Renewable Power Systems
SCB10 Series Resin-Insulated Dry-Type Transformer for Energy Storage and Renewable Power Systems
SCB10 Series Resin-Insulated Dry-Type Transformer for Energy Storage and Renewable Power Systems

The SCB10 resin-insulated dry-type transformer is a three-phase, vacuum-pressure-impregnated distribution transformer engineered for grid-tied energy storage stations, solar PV plants, wind farms and industrial load centers. With a 30–3,150 kVA capacity range, 3–35 kV high-voltage options and configurable 50 / 60 Hz operation, the SCB10 series delivers reliable, low-loss power conversion in a flame-retardant, oil-free construction that meets IEC and major international grid standards.

Product Overview

The SCB10 series combines low-voltage copper-foil windings, F-class turn insulation, and a moisture-resistant resin system to deliver stable, fire-safe performance for indoor and outdoor load-center applications. The oil-free construction eliminates fire and pollution risk, supports direct mounting near load equipment, and complies with the most stringent building and safety codes worldwide.

Key Features
  • 01
    Low-voltage copper-foil winding with F-class turn insulation
    supports high short-circuit withstand and reduces ampere-turn imbalance.
  • 02
    Vacuum-pressure-impregnated resin system
    moisture-resistant, flame-retardant, low partial discharge, suitable for high-humidity and salt-spray
  • 03
    Wide capacity range
    30–3,150 kVA covering most distribution and renewable-step-up applications.
  • 04
    Configurable voltage class
    HV 3 kV / 6 kV / 10 kV / 15 kV / 35 kV; LV 220 V / 380 V / 400 V / 480 V.
  • 05
    Low noise level (<55 dB at 1 m)
    suitable for hospitals, schools, data centers and residential substations.
  • 06
    Temperature monitoring (BWDK series signal thermometer) embedded
    over-temperature alarm and trip function.
Technical Specifications

Electrical Performance

 

Parameter Specification
Rated Capacity 30 – 3,150 kVA
High Voltage 3 kV / 6 kV / 10 kV / 15 kV / 35 kV
Low Voltage 220 V / 380 V / 400 V / 480 V (customizable)
Frequency 50 Hz / 60 Hz
Phase Three-phase
Cooling Method AN (natural) / AF (forced-air)
Winding Material Copper foil (LV) + copper wire (HV)
Insulation Class F (155 °C) / H (180 °C optional)
Connection Group Dyn11 / Yyn0 / others as required
Impedance Voltage 4% – 6% (capacity-dependent)
Partial Discharge < 10 pC (1.1 × Um)
Noise Level < 55 dB @ 1 m (AN)

 

Materials & Components

 

Component Material / Specification
Core Cold-rolled grain-oriented silicon steel, 45° step-lap construction
LV Winding Copper foil, F-class insulation
HV Winding Enameled copper wire with vacuum-pressure impregnation
Resin System Flame-retardant epoxy resin (UL94 V-0 grade)
Temperature Sensor BWDK series Pt100 RTD with signal thermometer
Enclosure (optional) Carbon-steel powder-coated (RAL 7035) / stainless steel
Application Scenarios

The SCB10 series combines low-voltage copper-foil windings, F-class turn insulation, and a moisture-resistant resin system to deliver stable, fire-safe performance for indoor and outdoor load-center applications.

Energy Storage Power Stations
Energy Storage Power Stations
Step-up / step-down interface for utility-scale BESS, microgrid storage, and behind-the-meter commercial storage systems.
Solar PV Power Plants
Solar PV Power Plants
Medium-voltage step-up for centralized PV stations; pairs with grid-tied inverters for direct medium-voltage interconnection.
Wind Power Bases
Wind Power Bases
Onshore and offshore wind farm step-up transformers with reinforced anti-seismic, low-temperature and anti-corrosion design.
Structural Highlights
Structural Highlights

Low-Voltage Foil Winding

Full-width copper foil with F-class turn insulation manages short-circuit stress, balances ampere-turn distribution and supports effective heat dissipation — particularly important for storage applications with frequent charge-discharge cycles.

 

Temperature Monitoring

BWDK-series signal thermometers embedded in the low-voltage coil provide per-phase temperature monitoring and trigger over-temperature alarm / trip protection. Optional RS485 Modbus interface supports remote SCADA integration.

 

Reinforced Resin Insulation

Vacuum-pressure impregnated resin creates a sealed, moisture-resistant insulation system that prevents partial discharge even under high humidity — ideal for tropical climates, coastal installations and offshore wind sites.

Compliance & Certification

· IEC 60076 (Power Transformers) and IEC 60076-11 (Dry-Type Power Transformers) · IEC 60726 (Loading guide for dry-type power transformers) · GB/T 10228 (Dry-Type Power Transformers — China National Standard) · UL / CE / TUV / KEMA certifications available on project basis

Service & Warranty

Compared with flat or half-round rasps, the round wood rasp offers clear advantages when working on curved or enclosed spaces:

  • Standard warranty: 24 months from delivery or 18 months from commissioning.

    Standard warranty: 24 months from delivery or 18 months from commissioning.

  • 10-year spare-parts availability guarantee for long-term maintenance support.

    10-year spare-parts availability guarantee for long-term maintenance support.

  • Lifetime remote technical support via email / video call / 7×24 hotline.

    Lifetime remote technical support via email / video call / 7×24 hotline.

  • On-site commissioning and operator training available (optional service).

    On-site commissioning and operator training available (optional service).

Frequently Asked Questions
  • What product categories does your company manufacture?

    • We manufacture a complete portfolio including dry-type transformers (SCB10 / SCB13 series), oil-immersed transformers (S11 / S13 series), renewable-energy-specific transformers (PV, wind and energy storage), prefabricated substations (ZBW European-style, ZGS American-style), high-voltage switchgear, low-voltage switchgear and integrated BESS containers. We also provide OEM / ODM customization for project-specific configurations.

  • Which international standards are your products compliant with?

    • Our products are designed and tested to IEC 60076, IEC 60076-11, IEC 62271 and IEC 61439. Specific certifications include CE, UL, TUV, KEMA, CCC, ISO 9001, ISO 14001 and ISO 45001. Grid-code compliance is available for major markets including EU, North America, Australia, GCC, South America and Southeast Asia.

  • Can you customize equipment for specific grid codes or extreme environments?

    • Yes. We perform grid-code compliance engineering for major markets (G99, VDE-AR-N 4105, AS/NZS 4777.2, NRS 097-2-1, IEEE 1547, etc.). For extreme environments, we offer C5-M marine-grade coating for coastal sites, low-temperature design for -40°C operation, high-altitude derating for >2,000 m, and seismic-reinforced structure per IEC 60068-3-3.

  • What is your production capacity and lead time?

    • Our factory operates 15+ automated production units including laser cutting, robotic welding, CNC core cutting, vacuum-pressure impregnation and automated winding lines. Standard products ship in 3–6 weeks; custom-engineered configurations require 6–10 weeks. Annual capacity exceeds 20,000 MVA of distribution transformer equivalent.

  • Do you support third-party inspection and witness tests?

    • Yes. We routinely host third-party inspection by TUV, KEMA, CE, UL and customer-appointed inspectors. Witness tests can be scheduled for routine tests, type tests or special tests per the agreed project specification.

Related Products
Ready To Work With Us?

If you have enquiries on custom power solutions or project cooperation, please feel free to contact our international team.

Ready To <span>Work With</span> Us?